{"id":3158,"date":"2026-03-27T14:44:56","date_gmt":"2026-03-27T13:44:56","guid":{"rendered":"https:\/\/www.nickelcasting.com\/?page_id=3158"},"modified":"2026-03-27T14:48:16","modified_gmt":"2026-03-27T13:48:16","slug":"slip-on","status":"publish","type":"page","link":"https:\/\/www.nickelcasting.com\/de\/product-forms\/flanges\/slip-on\/","title":{"rendered":"Aufschiebbare Flansche"},"content":{"rendered":"
\n\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\n\n
\n\n
\n Startseite<\/a> \n \/<\/span> \n Produkt Formulare<\/a>\n \/<\/span> \n Flansche<\/a>\n \/<\/span> \n Slip-On\n <\/div>\n\n
\n

Aufsteckflansche aus Nickellegierung<\/h1>\n \n

\n Wenn eine einfache Installation und eine pr\u00e4zise Ausrichtung der Rohre entscheidend sind, ist Slip-On Flansche<\/a> (SORF \/ SOFF) bieten eine vielseitige und kosteng\u00fcnstige L\u00f6sung. 28Nickel stellt hochwertige geschmiedete Aufsteckflansche aus einer Nickellegierung her, die direkt auf Ihre Rohrleitungen aufgeschoben werden, bevor sie mit internen und externen Kehln\u00e4hten gesichert werden. Sie werden h\u00e4ufig in der chemischen Verarbeitung mit niedrigerem Druck, in K\u00fchlleitungen f\u00fcr die Schifffahrt und in Fl\u00fcssigkeitstransportsystemen eingesetzt.\n <\/p>\n <\/div>\n\n

Verf\u00fcgbare Legierungssorten f\u00fcr Aufsteckflansche<\/h2>\n

\n Um die Integrit\u00e4t Ihres gesamten Rohrleitungsnetzes zu erhalten, m\u00fcssen Ihre Flansche der Korrosionsbest\u00e4ndigkeit Ihrer Rohre entsprechen. Wir liefern Aufsteckflansche, die aus den zuverl\u00e4ssigsten Superlegierungen geschmiedet sind und sicherstellen, dass Ihre Verbindungen Salzwasser, aggressiven S\u00e4uren und hohen Temperaturen standhalten.\n <\/p>\n \n

\n

W\u00e4hlen Sie eine Sorte, um die Materialspezifikationen anzuzeigen:<\/h3>\n
\n Inconel\u00ae 625 (hervorragende Lochfra\u00dfbest\u00e4ndigkeit)<\/a>\n Inconel\u00ae 718 (hohe Festigkeit)<\/a>\n \n Monel\u00ae 400 (HF-S\u00e4ure und Seewasser)<\/a>\n Monel\u00ae K-500 (Marine\/Sauergas)<\/a>\n \n Hastelloy\u00ae C-276 (Schwere chemische Verarbeitung)<\/a>\n Waspaloy\u00ae (Hochtemperatur-Auspuffanlagen)<\/a>\n <\/div>\n <\/div>\n\n

Technisches Profil von Aufsteckflanschen<\/h2>\n

\n Aufsteckflansche haben eine Bohrung, die etwas gr\u00f6\u00dfer ist als der Au\u00dfendurchmesser (OD) des Anschlussrohrs, so dass das Rohr vor dem Schwei\u00dfen leicht in den Flansch gleiten kann.\n <\/p>\n \n \n\n

\n \n
\n
\n
\ud83d\udccf<\/div>\n

Leichteres Ausrichten<\/h3>\n <\/div>\n

Da das Rohr in den Flansch gleitet, haben die Bediener beim Abl\u00e4ngen des Rohrs einen gr\u00f6\u00dferen Spielraum f\u00fcr Fehler. Dies macht die Ausrichtung w\u00e4hrend der Rohrleitungsherstellung deutlich schneller und einfacher als bei Vorschwei\u00dfflansche<\/a>.<\/p>\n <\/div>\n\n

\n
\n
\u26a1<\/div>\n

Doppelte Kehln\u00e4hte<\/h3>\n <\/div>\n

Der Flansch ist durch zwei Kehlschwei\u00dfn\u00e4hte - eine au\u00dfen (an der Nabe) und eine innen (nahe der Stirnseite) - am Rohr befestigt und bietet so ausreichende Festigkeit und Leckagesicherheit f\u00fcr Anwendungen mit mittlerem Druck.<\/p>\n <\/div>\n\n

\n
\n
\ud83d\udcc9<\/div>\n

Kosteneffizientes Schmieden<\/h3>\n <\/div>\n

Aufsteckflansche erfordern in der Regel weniger komplexe Schmiede- und Bearbeitungsvorg\u00e4nge als Vorschwei\u00dfflansche, was zu geringeren Anschaffungskosten der Komponenten f\u00fchrt und sie f\u00fcr Fl\u00fcssigkeitsleitungen mit geringerem Risiko sehr wirtschaftlich macht.<\/p>\n <\/div>\n\n

\n
\n
\u26a0\ufe0f<\/div>\n

\u00dcberlegungen zur Anwendung<\/h3>\n <\/div>\n

Aufgrund des Zwischenraums zwischen dem Rohrende und der Flanschfl\u00e4che werden sie nicht f\u00fcr stark abrasive Medien oder schwere zyklische Bedingungen empfohlen, da der innere Spalt anf\u00e4llig f\u00fcr Spaltkorrosion sein kann.<\/p>\n <\/div>\n\n <\/div>\n\n

Standard-Spezifikationen und Abmessungen<\/div>\n
\n \n \n \n \n \n \n \n \n \n
Spezifikation Kategorie<\/th>\n Details & Normen<\/th>\n <\/tr>\n <\/thead>\n
Abmessungsnormen<\/strong><\/td>\n ASME \/ ANSI B16.5 (bis zu 24\"), ASME B16.47 Serie A & B (gro\u00dfer Durchmesser)<\/td>\n <\/tr>\n
Gemeinsame Druckklassen<\/strong><\/td>\n 150#, 300#, 600# (Aufsteckflansche werden in den Klassen \u00fcber 600# aufgrund der strukturellen Einschr\u00e4nkungen im Vergleich zu Vorschwei\u00dfflanschen nur selten verwendet).<\/td>\n <\/tr>\n
Montage der Rohre<\/strong><\/td>\n Die Bohrung wird so bearbeitet, dass sie dem Au\u00dfendurchmesser (OD) des Rohrs entspricht. (Hinweis: Der Rohrplan hat keinen Einfluss auf die Flanschbohrung f\u00fcr Aufsteckflansche).<\/td>\n <\/tr>\n
Flanschabdeckung<\/strong><\/td>\n Erh\u00f6hte Fl\u00e4che (SORF) und flache Fl\u00e4che (SOFF) sind Standard.<\/td>\n <\/tr>\n
Herstellungsprozess<\/strong><\/td>\n Warmgeschmiedet und pr\u00e4zise CNC-bearbeitet.<\/td>\n <\/tr>\n <\/tbody>\n <\/table>\n <\/div>\n\n
\n

M\u00f6chten Sie ein Angebot anfordern?<\/h3>\n

Bei Anfragen zu Aufsteckflanschen geben Sie bitte die Legierungssorte an (z.B., Monel 400<\/a>), Rohrnennweite (NPS), Druckklasse (z.B. 150#) und Flanschbeschichtung (z.B. Raised Face). Wir liefern mit jeder Bestellung vollst\u00e4ndige Materialpr\u00fcfberichte (MTR).<\/p>\n Angebot f\u00fcr Aufsteckflansche einholen<\/a>\n <\/div>\n\n<\/div>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>","protected":false},"excerpt":{"rendered":"

Home \/ Product Forms \/ Flanges \/ Slip-On Nickel Alloy Slip-On Flanges When ease of installation and precise pipe alignment are critical, Slip-On Flanges (SORF \/ SOFF) offer a versatile and cost-effective solution. 28Nickel manufactures premium forged nickel alloy slip-on flanges designed to slide directly over your piping before being secured with internal and external […]<\/p>","protected":false},"author":1,"featured_media":0,"parent":3145,"menu_order":0,"comment_status":"closed","ping_status":"closed","template":"","meta":{"_uag_custom_page_level_css":"","site-sidebar-layout":"no-sidebar","site-content-layout":"page-builder","ast-site-content-layout":"full-width-container","site-content-style":"unboxed","site-sidebar-style":"unboxed","ast-global-header-display":"","ast-banner-title-visibility":"","ast-main-header-display":"","ast-hfb-above-header-display":"","ast-hfb-below-header-display":"","ast-hfb-mobile-header-display":"","site-post-title":"","ast-breadcrumbs-content":"","ast-featured-img":"disabled","footer-sml-layout":"","theme-transparent-header-meta":"default","adv-header-id-meta":"","stick-header-meta":"","header-above-stick-meta":"","header-main-stick-meta":"","header-below-stick-meta":"","astra-migrate-meta-layouts":"set","ast-page-background-enabled":"default","ast-page-background-meta":{"desktop":{"background-color":"var(--ast-global-color-4)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"tablet":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"mobile":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""}},"ast-content-background-meta":{"desktop":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"tablet":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"mobile":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""}},"footnotes":""},"class_list":["post-3158","page","type-page","status-publish","hentry"],"spectra_custom_meta":{"_edit_lock":["1774619163:1"],"_edit_last":["1"],"_elementor_edit_mode":["builder"],"_astra_content_layout_flag":["disabled"],"ast-title-bar-display":["disabled"],"ast-featured-img":["disabled"],"site-content-layout":["page-builder"],"ast-site-content-layout":["full-width-container"],"site-sidebar-layout":["no-sidebar"],"_elementor_template_type":["wp-page"],"_elementor_version":["3.33.2"],"_elementor_pro_version":["3.32.3"],"rank_math_seo_score":["56"],"rank_math_internal_links_processed":["1"],"_wp_page_template":["default"],"_elementor_data":["[{\"id\":\"459e2b1\",\"elType\":\"container\",\"settings\":{\"display_condition_list\":[{\"display_condition_login_status\":\"subscriber\",\"_id\":\"1684d2f\"}]},\"elements\":[{\"id\":\"9ad9619\",\"elType\":\"widget\",\"settings\":{\"html\":\"\\n\\n

\\n\\n
\\n Home<\\\/a> \\n \\\/<\\\/span> \\n Product Forms<\\\/a>\\n \\\/<\\\/span> \\n Flanges<\\\/a>\\n \\\/<\\\/span> \\n Slip-On\\n <\\\/div>\\n\\n
\\n

Nickel Alloy Slip-On Flanges<\\\/h1>\\n \\n

\\n When ease of installation and precise pipe alignment are critical, Slip-On Flanges (SORF \\\/ SOFF) offer a versatile and cost-effective solution. 28Nickel manufactures premium forged nickel alloy slip-on flanges designed to slide directly over your piping before being secured with internal and external fillet welds. They are widely utilized in lower-pressure chemical processing, marine cooling lines, and fluid transport systems.\\n <\\\/p>\\n <\\\/div>\\n\\n

Available Alloy Grades for Slip-On Flanges<\\\/h2>\\n

\\n To maintain the integrity of your entire piping network, your flanges must match the corrosion resistance of your pipe. We supply slip-on flanges forged from the most reliable superalloys, ensuring your joints survive exposure to saltwater, harsh acids, and high temperatures.\\n <\\\/p>\\n \\n

\\n

Select a Grade to View Material Specs:<\\\/h3>\\n
\\n Inconel\\u00ae 625 (Excellent Pitting Resistance)<\\\/a>\\n Inconel\\u00ae 718 (High Strength)<\\\/a>\\n \\n Monel\\u00ae 400 (HF Acid & Seawater)<\\\/a>\\n Monel\\u00ae K-500 (Marine\\\/Sour Gas)<\\\/a>\\n \\n Hastelloy\\u00ae C-276 (Severe Chemical Processing)<\\\/a>\\n Waspaloy\\u00ae (High Temp Exhausts)<\\\/a>\\n <\\\/div>\\n <\\\/div>\\n\\n

Engineering Profile of Slip-On Flanges<\\\/h2>\\n

\\n Slip-on flanges feature a bore size slightly larger than the outer diameter (OD) of the connecting pipe, allowing the pipe to easily slide into the flange prior to welding.\\n <\\\/p>\\n \\n \\n\\n

\\n \\n
\\n
\\n
\\ud83d\\udccf<\\\/div>\\n

Easier Alignment<\\\/h3>\\n <\\\/div>\\n

Because the pipe slides into the flange, operators have a greater margin for error when cutting the pipe to length. This makes alignment during pipeline fabrication significantly faster and easier than with weld neck flanges.<\\\/p>\\n <\\\/div>\\n\\n

\\n
\\n
\\u26a1<\\\/div>\\n

Double Fillet Welds<\\\/h3>\\n <\\\/div>\\n

The flange is secured to the pipe by two fillet welds\\u2014one on the outside (at the hub) and one on the inside (near the face)\\u2014providing sufficient strength and leak prevention for moderate-pressure applications.<\\\/p>\\n <\\\/div>\\n\\n

\\n
\\n
\\ud83d\\udcc9<\\\/div>\\n

Cost-Effective Forging<\\\/h3>\\n <\\\/div>\\n

Slip-on flanges generally require less complex forging and machining than weld neck flanges, resulting in a lower initial component cost, making them highly economical for lower-risk fluid lines.<\\\/p>\\n <\\\/div>\\n\\n

\\n
\\n
\\u26a0\\ufe0f<\\\/div>\\n

Application Considerations<\\\/h3>\\n <\\\/div>\\n

Due to the space between the pipe end and the flange face, they are not recommended for highly abrasive media or severe cyclic conditions, as the internal gap can be susceptible to crevice corrosion.<\\\/p>\\n <\\\/div>\\n\\n <\\\/div>\\n\\n

Standard Specifications & Dimensions<\\\/div>\\n
\\n \\n \\n \\n \\n \\n \\n \\n \\n \\n
Specification Category<\\\/th>\\n Details & Standards<\\\/th>\\n <\\\/tr>\\n <\\\/thead>\\n
Dimensional Standards<\\\/strong><\\\/td>\\n ASME \\\/ ANSI B16.5 (Up to 24\\\"), ASME B16.47 Series A & B (Large Diameter)<\\\/td>\\n <\\\/tr>\\n
Common Pressure Classes<\\\/strong><\\\/td>\\n 150#, 300#, 600# (Slip-on flanges are rarely used in classes above 600# due to structural limitations compared to weld neck flanges).<\\\/td>\\n <\\\/tr>\\n
Pipe Fitment<\\\/strong><\\\/td>\\n Bore is machined to accommodate the Outer Diameter (OD) of the pipe. (Note: Pipe schedule does not affect the flange bore for slip-ons).<\\\/td>\\n <\\\/tr>\\n
Flange Facing<\\\/strong><\\\/td>\\n Raised Face (SORF) and Flat Face (SOFF) are standard.<\\\/td>\\n <\\\/tr>\\n
Manufacturing Process<\\\/strong><\\\/td>\\n Hot Forged and Precision CNC Machined.<\\\/td>\\n <\\\/tr>\\n <\\\/tbody>\\n <\\\/table>\\n <\\\/div>\\n\\n
\\n

Ready to Request a Quote?<\\\/h3>\\n

When inquiring about Slip-On Flanges, please specify the alloy grade (e.g., Monel 400), nominal pipe size (NPS), pressure class (e.g., 150#), and flange facing (e.g., Raised Face). We supply full material test reports (MTR) with every order.<\\\/p>\\n Get a Slip-On Flange Quote<\\\/a>\\n <\\\/div>\\n\\n<\\\/div>\",\"display_condition_list\":[{\"display_condition_login_status\":\"subscriber\",\"_id\":\"09dd6b0\"}]},\"elements\":[],\"widgetType\":\"html\"}],\"isInner\":false}]"],"_elementor_page_settings":["a:0:{}"],"_elementor_controls_usage":["a:2:{s:4:\"html\";a:3:{s:5:\"count\";i:1;s:15:\"control_percent\";i:0;s:8:\"controls\";a:2:{s:7:\"content\";a:1:{s:13:\"section_title\";a:1:{s:4:\"html\";i:1;}}s:8:\"advanced\";a:1:{s:26:\"display_conditions_section\";a:1:{s:22:\"display_condition_list\";i:1;}}}}s:9:\"container\";a:3:{s:5:\"count\";i:1;s:15:\"control_percent\";i:0;s:8:\"controls\";a:1:{s:8:\"advanced\";a:1:{s:26:\"display_conditions_section\";a:1:{s:22:\"display_condition_list\";i:1;}}}}}"],"rank_math_description":["Nickel alloy slip-on flanges in Inconel, Monel, Hastelloy and Waspaloy for chemical, marine and fluid piping with easy alignment and secure welds."],"rank_math_focus_keyword":["slip on flanges"],"ilj_blacklistdefinition":["a:0:{}"],"ilj_linkdefinition":["a:1:{i:0;s:15:\"slip on flanges\";}"],"site-content-style":["unboxed"],"site-sidebar-style":["unboxed"],"theme-transparent-header-meta":["default"],"astra-migrate-meta-layouts":["set"],"_uag_page_assets":["a:9:{s:3:\"css\";s:263:\".uag-blocks-common-selector{z-index:var(--z-index-desktop) !important}@media (max-width: 976px){.uag-blocks-common-selector{z-index:var(--z-index-tablet) !important}}@media (max-width: 767px){.uag-blocks-common-selector{z-index:var(--z-index-mobile) !important}}\n\";s:2:\"js\";s:0:\"\";s:18:\"current_block_list\";a:8:{i:0;s:11:\"core\/search\";i:1;s:10:\"core\/group\";i:2;s:12:\"core\/heading\";i:3;s:17:\"core\/latest-posts\";i:4;s:20:\"core\/latest-comments\";i:5;s:13:\"core\/archives\";i:6;s:15:\"core\/categories\";i:7;s:10:\"core\/image\";}s:8:\"uag_flag\";b:0;s:11:\"uag_version\";s:10:\"1779372270\";s:6:\"gfonts\";a:0:{}s:10:\"gfonts_url\";s:0:\"\";s:12:\"gfonts_files\";a:0:{}s:14:\"uag_faq_layout\";b:0;}"],"_uag_css_file_name":["uag-css-3158.css"],"_elementor_page_assets":["a:1:{s:7:\"scripts\";a:1:{i:0;s:18:\"elementor-frontend\";}}"],"_elementor_css":["a:6:{s:4:\"time\";i:1779911433;s:5:\"fonts\";a:0:{}s:5:\"icons\";a:0:{}s:20:\"dynamic_elements_ids\";a:0:{}s:6:\"status\";s:4:\"file\";i:0;s:0:\"\";}"],"_elementor_element_cache":["{\"timeout\":1780001433,\"value\":{\"content\":\"

\\n\\t\\t\\t\\t\\t
\\n\\t\\t\\t\\t
\\n\\t\\t\\t\\t
\\n\\t\\t\\t\\t\\t\\n\\n
\\n\\n
\\n Home<\\\/a> \\n \\\/<\\\/span> \\n Product Forms<\\\/a>\\n \\\/<\\\/span> \\n Flanges<\\\/a>\\n \\\/<\\\/span> \\n Slip-On\\n <\\\/div>\\n\\n
\\n

Nickel Alloy Slip-On Flanges<\\\/h1>\\n \\n

\\n When ease of installation and precise pipe alignment are critical, Slip-On Flanges (SORF \\\/ SOFF) offer a versatile and cost-effective solution. 28Nickel manufactures premium forged nickel alloy slip-on flanges designed to slide directly over your piping before being secured with internal and external fillet welds. They are widely utilized in lower-pressure chemical processing, marine cooling lines, and fluid transport systems.\\n <\\\/p>\\n <\\\/div>\\n\\n

Available Alloy Grades for Slip-On Flanges<\\\/h2>\\n

\\n To maintain the integrity of your entire piping network, your flanges must match the corrosion resistance of your pipe. We supply slip-on flanges forged from the most reliable superalloys, ensuring your joints survive exposure to saltwater, harsh acids, and high temperatures.\\n <\\\/p>\\n \\n

\\n

Select a Grade to View Material Specs:<\\\/h3>\\n
\\n Inconel\\u00ae 625 (Excellent Pitting Resistance)<\\\/a>\\n Inconel\\u00ae 718 (High Strength)<\\\/a>\\n \\n Monel\\u00ae 400 (HF Acid & Seawater)<\\\/a>\\n Monel\\u00ae K-500 (Marine\\\/Sour Gas)<\\\/a>\\n \\n Hastelloy\\u00ae C-276 (Severe Chemical Processing)<\\\/a>\\n Waspaloy\\u00ae (High Temp Exhausts)<\\\/a>\\n <\\\/div>\\n <\\\/div>\\n\\n

Engineering Profile of Slip-On Flanges<\\\/h2>\\n

\\n Slip-on flanges feature a bore size slightly larger than the outer diameter (OD) of the connecting pipe, allowing the pipe to easily slide into the flange prior to welding.\\n <\\\/p>\\n \\n \\n\\n

\\n \\n
\\n
\\n
\\ud83d\\udccf<\\\/div>\\n

Easier Alignment<\\\/h3>\\n <\\\/div>\\n

Because the pipe slides into the flange, operators have a greater margin for error when cutting the pipe to length. This makes alignment during pipeline fabrication significantly faster and easier than with weld neck flanges.<\\\/p>\\n <\\\/div>\\n\\n

\\n
\\n
\\u26a1<\\\/div>\\n

Double Fillet Welds<\\\/h3>\\n <\\\/div>\\n

The flange is secured to the pipe by two fillet welds\\u2014one on the outside (at the hub) and one on the inside (near the face)\\u2014providing sufficient strength and leak prevention for moderate-pressure applications.<\\\/p>\\n <\\\/div>\\n\\n

\\n
\\n
\\ud83d\\udcc9<\\\/div>\\n

Cost-Effective Forging<\\\/h3>\\n <\\\/div>\\n

Slip-on flanges generally require less complex forging and machining than weld neck flanges, resulting in a lower initial component cost, making them highly economical for lower-risk fluid lines.<\\\/p>\\n <\\\/div>\\n\\n

\\n
\\n
\\u26a0\\ufe0f<\\\/div>\\n

Application Considerations<\\\/h3>\\n <\\\/div>\\n

Due to the space between the pipe end and the flange face, they are not recommended for highly abrasive media or severe cyclic conditions, as the internal gap can be susceptible to crevice corrosion.<\\\/p>\\n <\\\/div>\\n\\n <\\\/div>\\n\\n

Standard Specifications & Dimensions<\\\/div>\\n
\\n \\n \\n \\n \\n \\n \\n \\n \\n \\n
Specification Category<\\\/th>\\n Details & Standards<\\\/th>\\n <\\\/tr>\\n <\\\/thead>\\n
Dimensional Standards<\\\/strong><\\\/td>\\n ASME \\\/ ANSI B16.5 (Up to 24\\\"), ASME B16.47 Series A & B (Large Diameter)<\\\/td>\\n <\\\/tr>\\n
Common Pressure Classes<\\\/strong><\\\/td>\\n 150#, 300#, 600# (Slip-on flanges are rarely used in classes above 600# due to structural limitations compared to weld neck flanges).<\\\/td>\\n <\\\/tr>\\n
Pipe Fitment<\\\/strong><\\\/td>\\n Bore is machined to accommodate the Outer Diameter (OD) of the pipe. (Note: Pipe schedule does not affect the flange bore for slip-ons).<\\\/td>\\n <\\\/tr>\\n
Flange Facing<\\\/strong><\\\/td>\\n Raised Face (SORF) and Flat Face (SOFF) are standard.<\\\/td>\\n <\\\/tr>\\n
Manufacturing Process<\\\/strong><\\\/td>\\n Hot Forged and Precision CNC Machined.<\\\/td>\\n <\\\/tr>\\n <\\\/tbody>\\n <\\\/table>\\n <\\\/div>\\n\\n
\\n

Ready to Request a Quote?<\\\/h3>\\n

When inquiring about Slip-On Flanges, please specify the alloy grade (e.g., Monel 400), nominal pipe size (NPS), pressure class (e.g., 150#), and flange facing (e.g., Raised Face). We supply full material test reports (MTR) with every order.<\\\/p>\\n Get a Slip-On Flange Quote<\\\/a>\\n <\\\/div>\\n\\n<\\\/div>\\t\\t\\t\\t<\\\/div>\\n\\t\\t\\t\\t<\\\/div>\\n\\t\\t\\t\\t\\t<\\\/div>\\n\\t\\t\\t\\t<\\\/div>\\n\\t\\t\",\"scripts\":[],\"styles\":[]}}"]},"uagb_featured_image_src":{"full":false,"thumbnail":false,"medium":false,"medium_large":false,"large":false,"1536x1536":false,"2048x2048":false,"trp-custom-language-flag":false},"uagb_author_info":{"display_name":"nickel","author_link":"https:\/\/www.nickelcasting.com\/de\/author\/nickel\/"},"uagb_comment_info":0,"uagb_excerpt":"Home \/ Product Forms \/ Flanges \/ Slip-On Nickel Alloy Slip-On Flanges When ease of installation and precise pipe alignment are critical, Slip-On Flanges (SORF \/ SOFF) offer a versatile and cost-effective solution. 28Nickel manufactures premium forged nickel alloy slip-on flanges designed to slide directly over your piping before being secured with internal and external…","_links":{"self":[{"href":"https:\/\/www.nickelcasting.com\/de\/wp-json\/wp\/v2\/pages\/3158","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.nickelcasting.com\/de\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/www.nickelcasting.com\/de\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/www.nickelcasting.com\/de\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.nickelcasting.com\/de\/wp-json\/wp\/v2\/comments?post=3158"}],"version-history":[{"count":6,"href":"https:\/\/www.nickelcasting.com\/de\/wp-json\/wp\/v2\/pages\/3158\/revisions"}],"predecessor-version":[{"id":3166,"href":"https:\/\/www.nickelcasting.com\/de\/wp-json\/wp\/v2\/pages\/3158\/revisions\/3166"}],"up":[{"embeddable":true,"href":"https:\/\/www.nickelcasting.com\/de\/wp-json\/wp\/v2\/pages\/3145"}],"wp:attachment":[{"href":"https:\/\/www.nickelcasting.com\/de\/wp-json\/wp\/v2\/media?parent=3158"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}