Monel® R-405
Monel R-405 is the free-machining version of Monel 400. It retains the excellent corrosion resistance and physical properties of Monel 400, but has a controlled amount of sulfur added to create sulfide inclusions that act as chip breakers during machining.
- Formas comunes: Round Bar, Hex Bar, Rod, Wire.
- Característica clave: Excellent machinability for automatic screw machines.
- Resistencia a la corrosión: Similar to Monel 400 (resistant to sea water, acids, alkalis).
- Standard: Primarily furnished as bar and rod (ASTM B164).
Select Monel R-405 when you need the corrosion resistance of Monel 400 but your application involves high-volume production of complex parts on automatic screw machines. The sulfur additions significantly reduce tool wear and machining time.
Superior Machinability
The increased sulfur content creates manganese sulfide inclusions that break chips easily, allowing for higher cutting speeds and better surface finish.
Resistencia a la corrosión
Exhibits the same resistance as Monel 400 to sea water, hydrofluoric acid, sulfuric acid, and alkalis in most environments.
Ideal for Small Parts
Perfect for manufacturing intricate fasteners, valve components, and small hardware where machining cost is a major factor.
| Elemento | Contenido (%) |
|---|---|
| Níquel (Ni) | 63,0 min |
| Cobre (Cu) | 28.0 - 34.0 |
| Hierro (Fe) | 2,5 máx. |
| Manganeso (Mn) | 2,0 máx. |
| Carbono (C) | 0,3 máx. |
| Silicio (Si) | 0,5 máx. |
| Azufre (S) | 0.025 - 0.060 |
*Note: The higher sulfur content is the key difference from Monel 400.
| Forma del producto | Normas ASTM / ASME |
|---|---|
| Bar & Rod (Cold-Drawn or Annealed) | ASTM B164, ASME SB164 |
| Alambre | ASTM B164 |
| Propiedad | Valores típicos (temperatura ambiente) |
|---|---|
| Resistencia a la tracción | 85 - 115 ksi (586 - 793 MPa) |
| Límite elástico (0.2% Offset) | 50 - 90 ksi (345 - 621 MPa) |
| Alargamiento | 35 - 15 % |
| Dureza (Brinell) | 160 - 220 HB |
*Note: Properties depend heavily on diameter and temper (annealed vs. cold-drawn).
Automatic Screw Machine Parts
High-volume production of small, complex components where machining efficiency is critical.
Fijaciones
Nuts, bolts, and screws used in corrosive marine or chemical environments.
Componentes de válvulas
Valve seats, stems, and trim that require both corrosion resistance and precision machining.
Water Meter Parts
Internal components for water meters exposed to various water conditions.
Need Free-Machining Monel R-405?
We supply Monel R-405 in cold-drawn bars and rods perfect for your machining needs. Contact us for current stock and pricing.
Presupuesto rápido