Monel® 400
Monel 400 is a solid-solution binary alloy of nickel (approx. 63%) and copper (approx. 30%) that offers an excellent combination of high strength and toughness over a wide temperature range, and superior resistance to many corrosive environments.
- Forme comuni: Pipe, Tube, Plate, Sheet, Round Bar, Wire, Forgings.
- Caratteristiche principali: Exceptional resistance to sea water and steam at high temperatures.
- Chemical Resistance: Resistant to hydrochloric and hydrofluoric acids when de-aerated.
- Saldabilità: Good weldability by standard processes.
Monel 400 is defined by its unique nickel-copper composition, which provides greater corrosion resistance than commercially pure nickel, particularly in reducing environments. Its versatility makes it a standard material in marine and chemical industries.
Marine Environment
The industry standard for marine applications due to its extremely low corrosion rate in flowing seawater and resistance to bio-fouling.
Hydrofluoric Acid
One of the few alloys that can withstand hydrofluoric acid in all concentrations up to the boiling point, making it vital for alkylation units.
High Strength & Toughness
Maintains excellent mechanical properties from sub-zero temperatures up to approx. 1000°F (538°C). It does not undergo a ductile-to-brittle transition.
| Elemento | Contenuto (%) |
|---|---|
| Nichel (Ni) | 63,0 min |
| Rame (Cu) | 28.0 - 34.0 |
| Ferro (Fe) | 2,5 max |
| Manganese (Mn) | 2.0 max |
| Carbonio (C) | 0,3 max |
| Silicio (Si) | 0,5 max |
| Zolfo (S) | 0.024 max |
| Forma del prodotto | Standard ASTM / ASME |
|---|---|
| Tubi e tubature (senza saldatura) | ASTM B165, ASME SB165 |
| Tubo (saldato) | ASTM B725, ASME SB725 |
| Piastra, foglio, striscia | ASTM B127, ASME SB127 |
| Bar & Rod | ASTM B164, ASME SB164 |
| Raccordi | ASTM B366, ASME SB366 |
| Forgiati | ASTM B564, ASME SB564 |
| Proprietà | Valori tipici (temperatura ambiente) |
|---|---|
| Resistenza alla trazione | 75 - 90 ksi (517 - 620 MPa) |
| Resistenza allo snervamento (offset 0,2%) | 25 - 50 ksi (172 - 345 MPa) |
| Allungamento | 35 - 60 % |
| Durezza (Brinell) | 110 - 150 HB |
*Note: Properties can vary significantly based on the product form and temper (e.g., cold-drawn vs. annealed).
Ingegneria navale
Propeller and pump shafts, sea water valves, strainer baskets, and fishing trawler parts.
Trattamento chimico
Equipment for handling hydrofluoric acid, sulfuric acid, and alkalis; salt production equipment.
Oil & Gas Well
Pump shafts and impellers, drill collars, and instruments used in corrosive well environments.
Electronic Components
Used in electrical and electronic applications due to its good electrical conductivity and non-magnetic properties (at room temp).
Need Monel 400 for Your Project?
We stock a wide range of Monel 400 in pipe, sheet, and bar forms. Contact our sales team for availability and mill test reports (MTR).
Ottenere un preventivo rapido